
Driveway Cleaning & Sealing
Lift years of dirt, moss and oil from block paving, concrete and stone, then seal it to keep the finish looking new for longer.

A low-pressure, surface-safe wash for render, brick, stone and painted walls that lifts algae and green growth without damage. The whole outside of the house, done properly. Free quotes across London.
Render, brick, stone, painted walls, fascias and soffits are the surfaces a pressure washer ruins fastest. They need a gentler approach, so we use low pressure plus a surface-safe treatment that kills algae, mould and green growth at the root rather than forcing water behind the finish. Silicone render, monocouche and K Rend all come up well this way, and so does old London stock brick, which stains green on the shaded side and goes patchy the moment anyone takes a jet wash to it. Most people book this as the whole outside of the house in one go, walls, fascias and soffits together, because the wall is only half of what you can see from the pavement. Cladding on a block or a commercial unit is a different job with different risks, so it has its own page.
Every property is different, so we price each job on its size, condition and access. You get a clear, fixed quote up front with no surprises, usually within one working day.
Drag the slider to see the difference on a job we've actually done. There are plenty more in the gallery.

BeforeAfterWe turn up when we say we will, use the right approach for each surface and leave the work looking the way it should.
Pressure washing blasts dirt off hard surfaces. Soft washing uses low pressure plus a cleaning solution to break down algae and mould, which is safer for render, brick and paintwork and tends to keep them clean for longer.
Brick too, and it is one of the better reasons to soft wash rather than jet wash. Old London stock brick is soft and porous, so pressure takes the face off it and leaves a patchy, blotchy finish that looks worse than the algae did. Low pressure and the right treatment lift the growth and the staining without touching the brick itself. Panel cladding on a block or a commercial unit is a separate job, on its own page, because the joints and gaskets need a different approach.
We take care to protect planting and rinse the surrounding areas. The treatments are applied carefully and under control, so borders and beds are looked after while we work.
Usually a good two to three years on render and brick, though it depends on how much sun and airflow the wall gets. A north-facing wall under trees goes green again faster than a south-facing one, because the growth we treat needs damp and shade to come back. Because we kill it at the root rather than washing it off the surface, it returns slowly rather than all at once.
Green, black or white marks, why a jet wash ruins London stock brick, and when to leave it.
Read the guideWhy soft washing beats a jet wash, and what the render manufacturers say.
Read the guideWhen to leave it, why jet washing is a mistake, and what's legal to spray.
Read the guide
Lift years of dirt, moss and oil from block paving, concrete and stone, then seal it to keep the finish looking new for longer.

Bring tired patios and paths back to life with a deep clean, then an optional seal to slow down moss, weeds and staining.

Black streaking and algae washed off cladding panels, curtain walling and fascias with low pressure, for blocks, shopfronts and commercial units. Free survey across London.
Use this short form to request pricing. Tell us the job, the postcode and your dates, and we'll come back with a clear quote.
